Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-100 — Xerox Phaser 6000

Code: 077-100

Description: Reg On Early Jam Paper stuck in the Registration section (or Main Paper Tray or Bypass Tray section) of the Printer was detected.
Causes: • Registration Sensor, PL2.3.5 • Harn assy rkn sns, PL2.2.25/26 • MCU Board, PL7.2.2
Remedy: • Check the media path for obstructions or debris. • Cycle printer power. • If the problem persists, follow this procedure.
1 Check connectors P/J12 and P/J120 between the MCU Board and the Registration Sensor. Are the connectors secure? Go to step 3. Reconnect the connectors, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Disconnect the MCU Board P/J21 and the Registration Sensor P/J120. Check the harness assy rkn sns for continuity. Is the harness damaged? Go to step 4. Repair the harness. 4 Disconnect the MCU Board P/J12. Is the voltage across ground and P/J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie