Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-304 — Xerox Phaser 6000

Code: 077-304

Description: Rear Cover Open A Rear Cover Open error was detected.
Causes: • Rear Door, PL1.1.6 • Interlock Switch, PL1.1.12 • LVPS, PL7.2.1 • MCU Board, PL7.2.2
Remedy: • Open and close the Rear Door. • Cycle printer power. • If the problem persists, follow this procedure.
1 Visually inspect the Rear Cover for damage. Is the Rear Cover damaged? Replace the Rear Cover. Go step 2. 2 Enter diagnostic mode and run the Cover Open Sensor test (see page 4-6). Does the number on the display increase by 1 each time the door is opened?. Go to step 4. Go to step 3. 3 Replace the Interlock Switch? Does the error persist? Go to step 4. Complete. 4 Replace the LVPS. Does the error still occur when printing? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie