Code: 077-901
Description: Exit Jam Paper remaining at the Exit section of the Printer was detected.
Causes: • Registration Sensor, PL2.3.5 • Harn assy rkn sns, PL2.2.25 • MCU Board, PL7.2.2
Remedy: 1 Check connectors P/J12 on the MCU Board and P/J120 on the Registration Sensor. Are the connections secure? Go to step 3. Secure the connectors, then go to step 2. 2 Does the error still occur when printing? Go to step 3. Complete. 3 Enter diagnostic mode and run the Regi Sensor test (see page 4-6). You can also use the CE Diag Tool to run this test (see page A-6). Lift the Main Paper Tray Chute (PL3.3.3). Does the number on the display change each time the Main Paper Tray Chute is lifted? Replace the MCU Board, then go to step 4. Go to step 5. 4 Does the error persist? Go to step 5. Complete. 5 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.