Code: 024-958
Description: Paper Size Mismatch The size of paper in the Main Paper Tray, or Bypass Tray, does not match the specified print size.
Causes: • Registration Sensor, PL2.3.5 • Harn assy rkn sns, PL2.2.25 • MCU Board, PL7.2.2
Remedy: • Check that the correct paper is in the paper tray. Change the paper if necessary. • Cycle printer power. • If the problem persists, follow this procedure.
1 Check connectors P/J12 and P/J120 between the MCU Board and the Registration Sensor. Are the connections secure? Go to step 3. Securely reconnect the connectors, then go to step 2. 2 Does the error still occur when printing? Go to step 3. Complete. 3 Does the error persist? Go to step 5. Complete. 4 Disconnect the MCU Board P/J12 and the Registration Sensor P/J120. Check the harness assy rkn sns for continuity. Is the harness damaged? Repair the harness. Go to step 5. 5 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.
1 Check connectors P/J12 and P/J120 between the MCU Board and the Registration Sensor. Are the connections secure? Go to step 3. Securely reconnect the connectors, then go to step 2. 2 Does the error still occur when printing? Go to step 3. Complete. 3 Does the error persist? Go to step 5. Complete. 4 Disconnect the MCU Board P/J12 and the Registration Sensor P/J120. Check the harness assy rkn sns for continuity. Is the harness damaged? Repair the harness. Go to step 5. 5 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.