Code: 024-963
Description: No Suitable Paper The Main Paper Tray, or Bypass Tray, has run out of paper, or the size (or type) of paper does not match the specified print size (or type).
Causes: • Registration Sensor, PL2.3.5 • Harn assy rkn sns, PL2.2.25 • MCU Board, PL7.2.2
Remedy: • Check that the correct paper is in the paper tray. Change, or load, the paper if necessary. • Cycle printer power. • If the problem persists, follow this procedure.
1 Check P/J12 on the MCU Board and P/J120 on the Registration Sensor. Are the connections secure? Go to step 3. Securely reconnect the connectors, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Disconnect the MCU Board P/J12 and the Registration Sensor P/J120. Check the Harness assy rkn sns for continuity. Is the harness damaged? Repair the harness. Go to step 4. 4 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.
1 Check P/J12 on the MCU Board and P/J120 on the Registration Sensor. Are the connections secure? Go to step 3. Securely reconnect the connectors, then go to step 2. 2 Does the error persist? Go to step 3. Complete. 3 Disconnect the MCU Board P/J12 and the Registration Sensor P/J120. Check the Harness assy rkn sns for continuity. Is the harness damaged? Repair the harness. Go to step 4. 4 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.