Code: 077-304
Description: Rear Cover Open A Rear Cover Open error was detected.
Causes: • Rear Door, PL1.1.6 • Interlock Switch, PL1.1.12 • LVPS, PL7.2.1 • MCU Board, PL7.2.2
Remedy: • Open and close the Rear Door. • Cycle printer power. • If the problem persists, follow this procedure.
1 Visually inspect the Rear Cover for damage. Is the Rear Cover damaged? Replace the Rear Cover. Go step 2. 2 Enter diagnostic mode and run the Cover Open Sensor test (see page 4-6). Does the number on the display increase by 1 each time the door is opened?. Go to step 4. Go to step 3. 3 Replace the Interlock Switch? Does the error persist? Go to step 4. Complete. 4 Replace the LVPS. Does the error still occur when printing? Replace the MCU Board. Complete.
1 Visually inspect the Rear Cover for damage. Is the Rear Cover damaged? Replace the Rear Cover. Go step 2. 2 Enter diagnostic mode and run the Cover Open Sensor test (see page 4-6). Does the number on the display increase by 1 each time the door is opened?. Go to step 4. Go to step 3. 3 Replace the Interlock Switch? Does the error persist? Go to step 4. Complete. 4 Replace the LVPS. Does the error still occur when printing? Replace the MCU Board. Complete.