Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-901 — Xerox Phaser 6010

Code: 077-901

Description: Exit Jam Paper remaining at the Exit section of the Printer was detected.
Causes: • Registration Sensor, PL2.3.5 • Harn assy rkn sns, PL2.2.25 • MCU Board, PL7.2.2
Remedy: 1 Check connectors P/J12 on the MCU Board and P/J120 on the Registration Sensor. Are the connections secure? Go to step 3. Secure the connectors, then go to step 2. 2 Does the error still occur when printing? Go to step 3. Complete. 3 Enter diagnostic mode and run the Regi Sensor test (see page 4-6). You can also use the CE Diag Tool to run this test (see page A-6). Lift the Main Paper Tray Chute (PL3.3.3). Does the number on the display change each time the Main Paper Tray Chute is lifted? Replace the MCU Board, then go to step 4. Go to step 5. 4 Does the error persist? Go to step 5. Complete. 5 Disconnect the MCU Board P/J12. Is the voltage across ground and J12-1 +3.3VDC? Replace the Registration Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6010

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie