Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 092-310, 092-910 — Xerox Phaser 6010

Code: 092-310, 092-910

Description: Check Unit ADC Sensor This message indicates that the ADC Sensor needs cleaning. • 092-310: ADC Sensor Dustiness Pre Warning • 092-910: ADC Sensor Dustiness
Causes: • MCU Board, PL7.2.2
Remedy: • Cycle printer power. • Clean the ADC Sensor. • If the problem persists, follow the procedure below.
1 Disconnect P/J14 on the MCU Board. Is the voltage across ground at P/J14-1 and P/J14-9 on the MCU Board +5 VDC? Go to step 2. Replace the MCU Board, then go to step 2. 2 Does the error persist? Contact your designated field support for assistance. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6010

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie