Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 026-750, 026-751, 026-752 — Xerox Phaser 6020

Code: 026-750, 026-751, 026-752

Description: Scan Communication Fail Communication failed during a scan job. • 026-750: Scan Communication Fail 026-750 Scan Job Failure Press OK <I/O Manager Detects Unknown Command Or Protocol From Network Link> • 026-751: Scan Communication Fail 026-751 Scan Job Failure Press OK <Network Link Is Disconnected While Sending Data Or Status> • 026-752: Scan Communication Fail 026-752 Scan Job Failure Press OK <I/O Manager Cannot Send USB Data>
Causes: • IP Board, PL7.1.9 • MCU Board, PL7.2.2
Remedy: 1. Verify there are no TCP/IP communications issues; • No duplicate IP addresses. • Printer is not set to DHCP and a static assigned IP address is in the printer network settings. Save new settings and restart the printer and computer if TCP/IP setting have been changed. Does the error persist? Go to step 2. Complete 2. Verify firmware and upgrade revision if needed. Does the error persist? Go to step 3. Complete. 3. Verify all cables are securely connected at the IP Board, external USB board, and attempt the job again. Does the error persist? Go to step 4. Complete. 4. Replace the IP Board (Phaser 6020/6022 and WorkCentre 6025 MFP, WorkCentre 6027 MFP. Does the error persist? Go to step 4. Complete. 5. 1. SaveNVM to ESS 2. Replace the MCU Board. 3. LoadNVM from ESS Complete.

← Xem tất cả mã lỗi Xerox Phaser 6020

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie