Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-108, 077-109 — Xerox Phaser 6022

Code: 077-108, 077-109

Description: Exit Jams The paper passed through the Exit Sensor earlier than the specified time or the paper does not pass through the Exit Sensor within the specified time.• 077-108: Paper Jam 077-108 Printer Jam at Exit, <Exit Jam> Early pass • 077-109: Paper Jam 077-109 Printer Jam at Exit, <Exit Jam> No pa
Causes: Fuser, PL5.1.1 MCU Board, PL7.2.2
Remedy: 1. Remove the fuser exit guide see. Are any torn off pieces of paper present? Remove the paper. Go to step 2. 2. Check P/J18 on the MCU Board. Is P/J18 connected securely? Go to step 3. Reconnect P/J18, then go to step 3. 3. Does the error persist? Replace the Fuser. Go to step 4. Complete. 4. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6022

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie