Code: 15
Description: Transfer Belt Cleaning Blade Pressure/Retraction Failure
Causes: *Retraction Position Sensor /Cleaning Blade (PC6) Pressure/Retraction Solenoid /Cleaning Blade (SL3) Main Motor (M1) PWB-A (Engine Control Board) * PC6 is part of the transfer belt.
Remedy: 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SL3 connector for proper connection and correct as necessary. 4 Check the PWB-A connector for proper connection and correct as necessary. 5 PC6 sensor check. PWB-A PJ9A-11 (ON) 2-F 6 SL3 operation check. PWB-A PJ10-5 (REM) 2-F 7 M1 operation check. PWB-A PJ8A-5 (REM) PWB-A PJ8A-8 (LOCK) 2-G¡«H 8 Change PWB-A.