Code: 18, 19, 1A, 1B
Description: Fuser Failures: 18: Fuser Warm-Up Failure 19: Fuser Low Heating Roller Temperature 1A: Fuser High Heating Roller Temperature 1B: Fuser Faulty Thermistor
Causes: Fuser PWB-A (Engine Control Board) Power Unit (PU)
Remedy: 1 Check that the input voltage to the printer matches the configuration of the engine (110/220 V) 2 Check the Fusing Unit for correct installation (whether it is secured in position). 3 Check the Fusing Unit, LVPS (PU), and PWB-A for proper connection and correct as necessary. 4 Check the lever and position of the Safety Switch (S2) and correct as necessary. 5 Change the Fusing Unit. 6 Change PWB-A. 7 Change LVPS (PU).