Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-351 — Xerox Phaser 6125

Code: 010-351

Description: Replace Fuser / Fuser Life The Fuser has reached end of life.
Causes: Fuser (PL6.1.1) MCU Board (PL8.2.13)
Remedy: 1 Check the life counter value of the Fuser Does the life counter value show the near of the end? Replace the Fuser. After replacing the Fuser, be sure to reset the life counter value. Go to step 2. 2 Check after reseating the Fuser Reseat the Fuser. Warning: Start the operation after the Fuser has cooled down. Does the error still occur when the power is turned OFF and ON? Go to step 3. Complete 3 Check after replacing the Fuser Replace the Fuser. Warning: Start the operation after the Fuser has cooled down. Does the error still occur when the power is turned OFF and ON? NOTE: After replacement, be sure to clear the life counter value. Replace the MCU Board. Complete

← Xem tất cả mã lỗi Xerox Phaser 6125

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie