Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 042-313 — Xerox Phaser 6125

Code: 042-313

Description: Fan Motor Error The Fan Motor is not in operation.
Causes: • MCU Board, PL8.2.13 • LVPS Harness Assy, PL9.1.3 • FAN, PL8.1.1 • LVPS Board, PL8.2.1
Remedy: 1 Perform the Fan test: Service Mode > Engine Diag > Fan HIGH. Does the Fan operate properly? Replace the MCU Board. Go to step 2. 2 Check the connection between the FAN and LVPS. Is P/J503 on the LVPS connected correctly? Go to step 4. Reconnect the connector P/ J503 correctly, then go to step 3. 3 Does the error still occur when the power is turned OFF and ON? Go to step 4. Complete 4 Check the connections between the LVPS and MCU Board. Are P/J501 and P/J14 connected correctly? Go to step 6. Reconnect the connector(s) P/ J501 and P/J14 correctly, then go to step 5. 5 Does the error still occur when the power is turned OFF and ON? Go to step 7. Complete 6 Disconnect J503 from the LVPS. defeat the front cover interlock and measure the voltage across P503-1pin <=> ground on the LVPS. Does the voltage read about +24 VDC? Replace the Fan. Replace the LVPS, then go to step 7. 7 Does the error still occur when the power is turned OFF and ON? Replace the MCU Board. Complete

← Xem tất cả mã lỗi Xerox Phaser 6125

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie