Description: Insert Imaging Unit Error An error occurred while reading the Imaging Unit CRUMs.
Causes: • Imaging Unit PL4.1.21 • MCU Board, PL10.7.7 • Imaging Unit Harness, PL10.8.11
Remedy: 1 Check the Imaging Unit CRUM harness. Disconnect P/J42 and P/J422 and check continuity. Is the harness damaged? Repair the harness. Go to step 2. 2 Replace the Imaging Unit. NOTE Remove the 8 sealing tapes from the new Imaging Unit before installation. Does the error persist? Replace the MCU Board. Complete.