Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-351 — Xerox Phaser 6128 MFP

Code: 010-351

Description: Replace Fuser or Fuser Life Error Warning Allow the Fuser to cool before removal. The Fuser has reached end of life. This troubleshooting procedure applies to this error.
Causes: • Fuser, PL6.1.1 • MCU Board, PL10.7.7
Remedy: 1 Check the Fuser life count. Has the count reached end of life? Replace the Fuser. Go to step 2. 2 Is the Fuser correctly installed? Go to step 3. Reseat the Fuser. 3 Cycle system power. Does the error persist. Go to step 4. Complete. 4 Replace the Fuser. Does the error still occur? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6128 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie