Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 010-397 — Xerox Phaser 6128 MFP

Code: 010-397

Description: Fuser Error Warning Allow the Fuser to cool before removal. Fuser temperature regulation has failed. This troubleshooting procedure applies to this error.
Causes: • Fuser, PL6.1.1 • MCU Board, PL10.7.7 • LVPS Harness, PL10.8.3 • Fuser Harness, PL10.8.6
Remedy: 1 Check the connectors P/J17 and P/J171 between the MCU Board and the Fuser. Are the connectors secure? Go to step 2. Reconnect the connectors. 2 Check the Fuser harness for continuity. • Disconnect P/J17 from the MCU Board. • Disconnect P/J171 from the Fuser. • Disconnect P/J47 from the LVPS. • Check continuity between P/J17 and P/J47 <=> P/J171. Is the harness damaged? Go to step 3. Repair the Fuser harness. 3 Check the LVPS Harness for continuity. • Disconnect P/J501 from the LVPS. • Disconnect P/J14 from the MCU Board. • Check continuity between P/J501 <=> P/ J14. Is the harness damaged? Go to step 4. Replace the LVPS Harness. 4 Replace the Fuser. Does the error persist? NOTE Reset the Fuser life counter after installation of a new Fuser. Go to step 5. Complete. 5 Replace the LVPS. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6128 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie