Code: 017-988
Description: PC Scan Time Out • Specified destination folder does not exist on the PC. • Black and White scanning was performed with JPEG specified as the image format. • There was no request from the PC within 30 seconds after Scan to Application was set via the printer menu.
Causes: • Image Processor Board (PL10.6.6) • USB Cable
Remedy: 1 Check the USB cable connection. Reconnect the PC and the printer. Does the error persist? Go to step 2. Complete. 2 Check the scanner driver on the PC. 1. Enable Windows Image Acquisition on the PC: Start > Settings > Control Panel > Administrative Tools > Services > Window Image Acquisition (WIA). 2. Check for the Scanner Icon on the PC: Start > Settings > Control Panel > Scanners and Cameras. Is the Scanner icon available? Go to step 3. Install the scanner driver. 3 Check the scanner software on the PC: Start > Programs > Xerox > Phaser 6128MFP. Is the Scan Manager software installed? Go to step 4. Install the scanner utility software. 4 Check the Scan Manager settings: Start > Programs > Xerox > Phaser 6128MFP > Express Scan Manager. Are the Scan Manager settings correct? NOTE Check that the output destination directory esists on the PC. Go to step 5. Correct the settings: • Image Type • Resolution • Paper Type • Output Destination 5 Check the scanner utility software: Start > Settings > Control Panel > Scanners and Cameras > Xerox Phaser 6128MFP Scanner. 1. Highlight and right-click on Phaser 6180MFP Scanner to open the Properties window. 2. Click the Events tab. 3. Check that the Select an event option is correctly selected. 4. Check the software being used with the scanner. Is Phaser 6128MFP Express Scan Manager selected? (Actions > Start this program > Phaser 6128MFP Express Scan Manager) Retry the scanning job. If the message gSelect the program to launch for this actionh appears on the PC, select the Express Scan Manager within 30 seconds. If the error persists, replace the I/P Board Under the Events tab, Actions box, Start the Express Scan Manager.