Code: 041-340
Description: MCU NVRAM Error Engine NVRAM is corrupted. The following troubleshooting procedure applies to this error.
Causes: • Imaging Unit, PL4.1.21 • Toner Cartridge, PL5.2.21~24 • Toner CRUM Harness, PL5.1.26 • MCU Board, PL10.7.7 • EEPROM Board, PL10.7.6 • Imaging Unit Harness, PL10.8.11
Remedy: 1 Check these connections: • P/J311 Yellow Cartridge CRUM • P/J312 Magenta Cartridge CRUM • P/J313 Cyan Cartridge CRUM • P/J314 Black Cartridge CRUM • P/J31 and P/J42 on the MCU Board • P/J144 on the EEPROM Board • P/J422 on the Imaging Unit Are the connections secure? Go to step 2. Secure the connections. 2 Check Toner CRUM harness continuity. Disconnect: • J311 from the Yellow CRUM • J312 from the Magenta CRUM • J313 from the Cyan CRUM • J314 from the Black CRUM • J31 from the MCU Board Is the harness damaged? Repair the harness. Go to step 3. 3 Check the Imaging Unit harness for continuity. Disconnect: • J42 from the MCU Board • J144 from the EEPROM Board • P422 from the Imaging Unit Is the harness damaged? Repair the harness. Go to step 4. 4 Check for +3.3 V at the MCU Board connector P/J42. Is there +3.3 V between P42-3 <=>ground? Replace the EEPROM Board. Go to step 5. 5 Reseat the MCU Board connections. Does the error persist? Replace the MCU Board. Complete.