Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 092-661 — Xerox Phaser 6128 MFP

Code: 092-661

Description: Env Sensor Error The Environmental Sensor has detected temperature error. This troubleshooting procedure applies to this error.
Causes: • Humidity/Temp Sensor PL10.4.20 • Humidity Harness, PL10.4.21 • MCU Board, PL10.7.7
Remedy: 1 Check the Humidity/Temperature Sensor for correct installation. Is the Humidity/Temperature Sensor correctly installed? Go to step 2. Reseat the Humidity/ Temperature Sensor. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 Check connectors P/J20 and P/J201 between the MCU Board and the Humidity/Temperature Sensor. Are the connectors securely connected? Go to step 4. Reconnect the connectors. 4 Check the Humidity Harness for continuity. Disconnect P/J20 from the MCU Board and P/J201 from the Humidity/Temperature Sensor. Is the harness damaged. Go to step 5. Replace the Humidity Harness. 5 Check the Humidity/Temperature Sensor signal. Is there +5 V across ground <=> J20- 4 pin on the MCU Board? Replace the Humidity/ Temperature Sensor. Replace the MCU Board.

← Xem tất cả mã lỗi Xerox Phaser 6128 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie