Code: 093-960, 093-961, 093-962, 093-926
Description: A Toner Cartridge CRUM ID error indicates a non-Xerox cartridge is installed. The following troubleshooting procedure applies to these errors. • 093-960: Non-Xerox Toner Yellow Print Cartridge • 093-961: Non-Xerox Toner Magenta Print Cartridge • 093-962: Non-Xerox Toner Cyan Print Cartridge • 093-926: Non-Xerox Toner Black Print Cartridge
Causes: • Toner Cartridge, PL5.1.21~24 • MCU Board, PL9.2.13 • Toner CRUM Harness, PL5.1.26 • Dispense Assembly PL5.1.1
Remedy: 1 Replace the affected Toner Cartridge. Does the error still occur? Go to step 2. Complete. 2 Check Toner CRUM harness continuity between P/J31 on the MCU Board and these CRUM connections: • Yellow: J311 • Magenta: J312 • Cyan: J313 • Black: J324 Is the Toner CRUM harness damaged? Repair the harness. Go to step 3. 3 Check the toner CRUM voltage at P/J31 on the MCU Board. Measure the voltage across: • Ground <=> P/J31-3 pin (Yellow) • Ground <=> P/J31-7 pin (Magenta) • Ground <=> P/J31-11 pin (Cyan) • Ground <=> P/J31-15 pin (Black) Is +3.3 V available at the indicated CRUM connector? Replace the Dispense Assembly. Go to step 4. 4 Check for +3.3 V at P/J14 on the MCU Board. Is 3.3 V available at P14-12? Replace the MCU Board. Replace the LVPS.