Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 094-351 — Xerox Phaser 6128 MFP

Code: 094-351

Description: Transfer Life or DTB Life Over Error The Transfer Belt has reached end of life. This troubleshooting procedure applies to these errors.
Causes: • Transfer Belt, PL6.1.7 • Left Side Harness, PL10.4.18 • MCU Board, PL10.7.7
Remedy: 1 Check the Transfer belt life counter. Has the counter reached end of life? Replace the Transfer Belt. Go to step 2. 2 Check the Transfer Belt installation. Is the Transfer Belt correctly installed? Go to step 3. Reseat the Transfer Belt. Go to step 2. 3 Does the error still occur when the printer is turned On? Go to step 4. Complete. 4 Check connectors P/J28 and P/J281 between the MCU Board and Transfer Belt. Are the connectors secure? Go to step 5. Reconnect the connectors. 5 Check Left Side Harness continuity. Disconnect P/J28 from the MCU Board and P/J281 to the Transfer Belt. Is the harness damaged? Repair or replace the harness (PL10.4.18). Go to step 6. 6 Replace the Transfer Belt. Does the error persist? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6128 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie