Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi -10 — Xerox Phaser 6130

Code: -10

Description: Front Cover Open The Front Cover is open.
Causes: • MCU Board, PL8.2.13 • Front Cover, PL1.1.7 • Interlock Harness, PL9.1.3
Remedy: 1 Is the Front Cover damaged? Replace the Front Cover. Go to step 2. 2 Check the Interlock Switch for operation. Perform the Cover Open Sensor test: Service Mode > Engine Diag > Sensor Test > Cover Open Sensor. Does the Switch operate properly? Replace the MCU Board. Go to step 3. 3 Measure the voltage a P44-1 <=> ground. Does the voltage measure +24 VDC? Go to step 4. Replace the LVPS. 4 Replace the Interlock Switch Harness. Does the error still occur? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6130

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie