Code: -11
Description: Side Door Open The Side Door (Toner Access Door) is open.
Causes: • MCU Board, PL8.2.13 • Cover Window Tnr (Toner Access Door), PL1.1.5 • Switch (Side door interlock), PL5.1.9
Remedy: 1 Is the Toner Access Door damaged? Replace the Toner Access Door. Go to step 2. 2 Open and close the Toner Access Door. Is the door latched correctly? Go to step 3. Reseat or replace the Toner Access Door. 3 Check the Side R Switch (SWITCH) for operation Perform the Side Switch test: Service Mode > Engine Diag > Sensor Test > Side Switch. Does the number on the screen increase by one when the Toner Access Door is closed and opened? Replace the MCU Board. Go to step 4. 4 Check the Side Switch Harness for continuity 1. Disconnect J29 from the MCU Board. 2. Disconnect J291 from the Side Switch. Is each cable of J29 <=> J291 continuous? Replace the Switch (R Side Door) then go to step 5. Replace the Harn Assy Side SW. 5 Does the error still occur when the power is turned OFF and ON? Replace the MCU Board. Complete