Code: 042-313
Description: Fan Motor Error The Fan Motor is not in operation.
Causes: • MCU Board, PL8.2.13 • LVPS Harness Assy, PL9.1.3 • FAN, PL8.1.1 • LVPS Board, PL8.2.1
Remedy: 1 Perform the Fan test: Service Mode > Engine Diag > Fan HIGH. Does the Fan operate properly? Replace the MCU Board. Go to step 2. 2 Check the connection between the FAN and LVPS. Is P/J503 on the LVPS connected correctly? Go to step 4. Reconnect the connector P/ J503 correctly, then go to step 3. 3 Does the error still occur when the power is turned OFF and ON? Go to step 4. Complete 4 Check the connections between the LVPS and MCU Board. Are P/J501 and P/J14 connected correctly? Go to step 6. Reconnect the connector(s) P/ J501 and P/J14 correctly, then go to step 5. 5 Does the error still occur when the power is turned OFF and ON? Go to step 7. Complete 6 Disconnect J503 from the LVPS. defeat the front cover interlock and measure the voltage across P503-1pin <=> ground on the LVPS. Does the voltage read about +24 VDC? Replace the Fan. Replace the LVPS, then go to step 7. 7 Does the error still occur when the power is turned OFF and ON? Replace the MCU Board. Complete