Code: 061-370
Description: Laser Error An error was detected in the Laser Unit.
Causes: • ROS (Laser Unit) Kit, PL4.1.99 • MCU Board, PL8.2.13
Remedy: 1 Check the Laser Unit for correct installation. Is the Laser Unit correctly installed? Go to step 3. Reinstall the Laser Unit. Go to step 2. 2 Cycle the power. Does the error still occur? Go to step 3. Complete. 3 Check the wiring harness connectors P/J40, P/J41, P/J411, and P/J412 between the MCU Board and the Laser Unit. Are the connectors securely connected? Go to step 5 Reconnect the connectors. Go to step 4. 4 Cycle the power. Does the error still occur? Go to step 5. Complete. 5 Replace the Laser Unit. Does the error still occur? Replace the MCU Board. Complete.