Description: Fuser Error (IOT Fuser Life Over) The Fuser has reached its end of life. The following troubleshooting procedure applies to this error. Warning The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes for the Fuser to cool before removing the Fuser.
Causes: • Fuser, PL6.1.10 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Fuser life using CentreWare IS. 2. Does the Level show 0%? Replace the Fuser. Go to step 2. 2 Is the Fuser correctly installed? Go to step 3. Reseat the Fuser. 3 Does the error still occur when the power is turned On? Go to step 4. Complete. 4 1. Replace the Fuser. 2. Does the error still occur? Replace the MCU Board. Complete.