Description: Replace Fuser Soon (Fuser End of Life) The Fuser has reached its end of life. Warning The Fuser may be hot. Turn the printer power Off and allow at least 5 minutes for the Fuser to cool before removing the Fuser.
Causes: • Fuser, PL6.1.10 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Fuser for correct installation. 2. Is the Fuser correctly installed? Go to step 3. Reseat the Fuser. Go to step 2. 2 Does the error still occur? Go to step 3. Complete. 3 1. Replace the Fuser. 2. Does the error still occur? Replace the MCU Board. Complete.