Code: 018-310 ... 116-333
Description: MPC Error Multi-Protocol Network Card error has occurred. The following troubleshooting procedure applies to these errors. • Chain Link 018-310: MPC Error (NIC ESS Communication) - Communication has failed between the MPC and the Controller. • Chain Link 018-311: MPC Error (NIC Flash ROM Boot Module Checksum Error) . Checksum error in MPC Flash ROM. • Chain Link 018-312: MPC Error (NIC RAM R/W Test Error) . The MPC RAM R/W check has detected an error. • Chain Link 018-313: MPC Error (NIC Flash ROM Application Module Checksum Error) . Checksum error occurred in the MPC Flash ROM. • Chain Link 018-314: MPC Error (NIC MAC Address Checksum Error) . Checksum error occurred in the MPC MAC Address. • Chain Link 018-315: MPC Error (NIC Ethernet BIST Parity/RAM R/W Error) . The MPC Ethernet BIST parity RAM R/W has detected an error. • Chain Link 018-316: MPC Error (NIC Internal Loopback Error) . The Loopback test has detected an error. • Chain Link 018-317: MPC Error (NIC Fatal Error) . MPC check has detected an error. • Chain Link 018-319: MPC Error (MPC OS Error) . MPC Network OS has detected an error. • Chain Link 018-320: MPC Error (MPC VxWorks Error) . MPC VxWORKS has detected an error. • Chain Link 116-333: MPC Error (PCI Option #0 Failure) . PCI option 0 error has occurred.
Causes: • Image Processor Board, PL9.1.20 • Multi-Protocol Network Card (Option), PL9.1.23
Remedy: 1 1. Check the Multi-Protocol Network Card (MPC) for correct installation. 2. Is the MPC correctly installed? Go to step 2. Reseat the MPC. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Replace the Multi-Protocol Network Card. 2. Does the error still occur? Replace the Image Processor Board. Complete.