Code: 024-911
Description: Load Tray 3 (Paper Mismatch) The paper size mismatch is detected in Tray 3. The following troubleshooting procedure applies to this error.
Causes: • MCU Board, PL9.2.13 • Tray 3 Size Switch, PL13.3.5 • Tray 3, PL13.4.1 • Tray 3 Retard Roll, PL13.4.10
Remedy: 1 1. Check the paper size. 2. Does the paper size meet the specifications? Go to step 2. Replace the paper with the correct specifications. 2 1. Check the paper size setting. 2. Does the paper match with the settings on the printer Control Panel? Go to step 4. Correct the paper settings on the printer Control Panel. 3 Does the error still occur when printing? Go to step 4. Complete. 4 1. Reseat the Tray Paper End Guide. 2. Does the error still occur? Go to step 5. Complete. 5 1. Replace Tray 2. 2. Does the error still occur when printing? Go to step 6. Complete. 6 1. Perform the Tray 3 Paper Size test: Service Mode > Printer Diag > Engine Diag > Sensor Test > Tray 3 Paper Size 2. Does Size Switch operate properly? Go to step 7. Replace the Tray 3 Size Switch Assembly. 7 1. Check the Rollers for operation. 2. Do the Rollers rotate smoothly? Replace the MCU Board. Replace the Retard Roller.