Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 041-340 — Xerox Phaser 6180

Code: 041-340

Description: MCU NVRAM Error Engine NVRAM is corrupted. The following troubleshooting procedure applies to this error.
Causes: • Transfer Unit, PL4.1.1 • HVPS, PL5.2.15 • Fuser, PL6.1.10 • EEPROM Board, PL9.2.1 • MCU Board, PL9.2.13 • Right Side Harness, PL10.1.12
Remedy: 1 1. Check the error on the Control Menu display. 2. Is the “ADDR:38**” error displayed? Go to step 2. Go to step 3. 2 1. Reseat the EEPROM Board. 2. Does the error still occur when the printer is turned On? Replace the EEPROM Board. Complete. 3 1. Check the error on the Control Menu display. 2. Is the “ADDR:3C**” error displayed? Go to step 4. Go to step 5. 4 1. Reseat the Fuser. 2. Does the error still occur when the printer is turned On? Replace the Fuser. Complete. 5 1. Check the error on the Control Menu display. 2. Is the “ADDR:3A**” error displayed? Go to step 6. Go to step 7. 6 1. Reseat the Transfer Unit. 2. Does the error still occur when the printer is turned On? Replace the Transfer Unit. Complete. 7 1. Check the error on the Control Menu display. 2. Is the “ADDR:31**” error displayed? Go to step 8. Complete. 8 1. Reseat the HVPS. 2. Does the error still occur after the printer is turned On? Replace the HVPS. Complete. 9 1. Reseat the MCU Board. 2. Does the error still occur after the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie