Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 061-370 — Xerox Phaser 6180

Code: 061-370

Description: Laser Error An error was detected in the Laser Unit. The following troubleshooting procedure applies to this error.
Causes: • Laser Unit, PL5.1.12 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Laser Unit for correct installation. 2. Is the Laser Unit correctly installed? Go to step 3. Reinstall the Laser Unit. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the wiring harness connector P/J12 on the MCU Board. 2. Is the connector securely connected? Go to step 5 Reconnect the connector. Go to step 4. 4 Does the error still occur when the printer is turned On? Go to step 5. Complete. 5 1. Check the MCU Board for correct installation. 2. Is the MCU Board correctly installed? Go to step 7. Reseat the MCU Board. Go to step 6. 6 Does the error still occur when the printer is turned On? Go to step 7. Complete. 7 1. Replace the Laser Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie