Description: Control Panel Error The parameter setting on the Control Panel has failed. The following troubleshooting procedure applies to these errors. • Chain Link 062-323: Panel Setting Parameter NG • Chain Link 123-314: Control Panel Error
Causes: • Control Panel, PL1.2.2 • Scanner Controller Board, PL9.1.1
Remedy: 1 1.Wait for 5 seconds and turn the printer Off and back On. 2. Does the error still occur when the printer is turned On? Go to step 2. Complete. 2 1. Check the Scanner Controller Board for correct installation. Reseat the Scanner Controller Board. 2. Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the Control Panel for correct installation. Reseat the Control Panel. 2. Does the error still occur when the printer is turned On? Go to step 4. Complete. 4 1. Replace the Scanner Controller Board. 2. Does the error still occur when the printer is turned On? Replace the Control Panel. Complete.