Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 072-215 — Xerox Phaser 6180

Code: 072-215

Description: 550 Feeder Error (Optional 550-Sheet Feeder) The Optional 550-Sheet Feeder has failed. The following troubleshooting procedure applies to this error.
Causes: • MCU Board, PL9.2.13 • Right Side Harness, PL10.1.12 • Optional 550-Sheet Feeder, PL13.1.1 • Feeder Unit Harness, PL13.3.3 • Tray 3 Feeder Board, PL13.3.6
Remedy: 1 1. Check the Optional 550-Sheet Feeder for correct installation. 2. Is the Optional 550-Sheet Feeder correctly installed? Go to step 3. Reseat the Optional 550- Sheet Feeder. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/J27, P/J273, and P/ J419 between the MCU Board and the Tray 3 Feeder Board. 2. Are the connectors securely connected? Go to step 5. Reconnect the connectors. Go to step 4. 4 Does the error still occur when the printer is turned On? Go to step 5. Complete. 5 Check the Feeder Unit Harness for continuity. 1. Disconnect P/J419 from the Tray 3 Feeder Board. 2. Disconnect P/J273 from the Right Side Harness. 3. Check continuity between P/J419 <=> P/J273. Go to step 6. Replace the Feeder Unit Harness. 6 Check the Right Side Harness for continuity. 1. Disconnect P/J27 from the MCU Board. 2. Disconnect P/J273 from the Feeder Unit Harness. 3. Check continuity between P/J27 <=> P/J273. To go step 7. Replace the Right Side Harness. 7 1. Replace the Optional 550-Sheet Feeder. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie