Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-215 — Xerox Phaser 6180

Code: 077-215

Description: Duplexer Error The Duplexer Unit has failed. The following troubleshooting procedure applies to this error.
Causes: • Front Cover Harness, PL1.2.13 • MCU Board, PL9.2.13 • Right Side Harness, PL10.1.12 • Duplex Unit, PL12.1.1 • Duplex Unit Harness, PL12.1
Remedy: 1 1. Check the Duplex Unit for correct installation. 2. Is the Duplex correctly installed? Go to step 3. Reseat the Duplex Unit. Go to step 2. 2 Does the error still occur when the printer turned On? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/J27, P/J272, P/J2720, and P/J428 between the Duplex Board and the MCU Board. 2. Are the connectors securely connected? Go to step 5. Reconnect the connectors. Go to step 4. 4 Does the error still occur when the printer is turned On? Go to step 5. Complete. 5 Check the Duplex Unit Harness for continuity. 1. Disconnect P/J428 from the Duplex Board. 2. Disconnect P/J2720 from the Front Cover Harness. 3. Check continuity between P/J428 <=> P/J2720. Go to step 6. Replace the Duplex Unit. 6 Check the Front Cover Harness for continuity. 1. Disconnect P/J272 from the Right Side Harness. 2. Disconnect P/J2720 from the Duplex Unit Harness. 3. Check continuity between P/J272 <=> P/J2720. Go to step 7. Replace the Front Cover Harness. 7 Check the Right Side Harness for continuity. 1. Disconnect P/J272 from the Front Cover Harness. 2. Disconnect P/J27 from the MCU Board. 3. Check continuity between P/J272 <=> P/J27. Go to step 8. Replace the Right Side Harness. 8 1. Replace the Duplex Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie