Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 077-300 — Xerox Phaser 6180

Code: 077-300

Description: Door A Open The Front Cover is open. The following troubleshooting procedure applies to this error.
Causes: • Front Cover, PL1.2.1 • Interlock Harness, PL9.2.3 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Front Cover for damages. 2. Are there any damages on the Front Cover? Replace the Front Cover. Go to step 2. 2 Check the Interlock Switch for operation. 1. Perform the Interlock Switch test: Service Mode > Printer Diag > Engine Diag > Sensor Test > Interlock Switch. 2. Does the Switch operate properly? Replace the MCU Board. Go to step 3. 3 1. Replace the Interlock Switch Harness. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie