Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 094-330 — Xerox Phaser 6180

Code: 094-330

Description: Transfer Unit CRUM Error The Transfer Unit CRUM ID error is detected. The following troubleshooting procedure applies to this error.
Causes: • Transfer Unit, PL4.1.1 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Transfer Unit for correct installation. 2. Is the Transfer Unit correctly installed? Go to step 3. Reseat the Transfer Unit. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Replace the Transfer Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie