Code: 094-910
Description: Insert Transfer Unit The printer does not detect the Transfer Unit. The following troubleshooting procedure applies to this error.
Causes: • Transfer Unit, PL4.1.1 • MCU Board, PL9.1.20 • Front Cover Harness, PL1.2.11 • Right Side Harness, PL10.1.15
Remedy: 1 Is the Transfer Unit installed correctly? Go to step 2. Reseat the Transfer Unit. 2 Does the error still occur? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/ J27, P/J272, and P/J2721 between the MCU Board and the Transfer Unit. 2. Are the connectors securely connected? Go to step 4. Reconnect the connectors. 4 Check the Right Side Harness for continuity. 1. Disconnect P/J27 from the MCU Board. 2. Disconnect P/J272 from the Front Cover Harness. 3. Check continuity between P/J27 <=> P/ J272. Go to step 5. Replace the Right Side Harness. 5 Check the Front Cover Harness for continuity. 1. Disconnect P/J272 from the Right Side Harness. 2. Disconnect P/J2721 from the Transfer Unit. 3. Check continuity between P/J272 <=> P/ J2721. Go to step 6. Replace the Front Cover Harness. 6 1. Replace the Transfer Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.