Code: 116-397, 116-398, 117-313
Description: Task Error Communication error has occurred while performing a copy job. The following troubleshooting procedure applies to these errors. • Chain Link 116-397: Controller Error (Communication Error with AIOC) • Chain Link 116-398: Controller Error (Communication Time Out with AIOC) • Chain Link 117-313: Controller Communication Error (ESS Data Transmission Error)
Causes: • Scanner Controller Board, PL9.1.1 • Image Processor Board, PL9.1.20 • AIO-ESS Harness Assembly, PL10.1.14
Remedy: 1 1. Turn the printer Off, wait for five seconds, and turn the printer back On. 2. Does the error still occur when copying? Go to step 2. Complete. 2 1. Check the wiring harness connector P/J480 on the Image Processor Board. Reseat the connector. 2. Does the error still occur when copying? Go to step 3. Complete. 3 1. Check the wiring harness connector P/J48 on the Scanner Controller Board. Reseat the connector. 2. Does the error still occur when copying? Go to step 4. Complete. 4 Check the AIO-ESS Harness for continuity. 1. Disconnect P/J48 from the Scanner Controller Board. 2. Disconnect P/J480 from the Image Processor Board. 3. Check continuity between P/J48 <=> P/J480. Go to step 5. Replace the AIO-ESS Harness Assembly. 5 1. Replace the Scanner Controller Board. 2. Does the error still occur when copying? Replace the Image Processor Board. Complete.