Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 016-790 — Xerox Phaser 6180 MFP

Code: 016-790

Description: Network Not Ready Error The network is not ready. The following troubleshooting procedure applies to this error.
Causes: • Scanner Controller Board, PL9.1.1 • Image Processor Board, PL9.1.20 • Multi-Protocol Card, PL9.1.23
Remedy: 1 1. Check the network connection using ping command. 2. Does the printer connect to the network? Go to step 2. Go to step 5. 2 1. Check the Address Book setting: System > Admin Menu > Address Book > Speed Dial/Group Dial. 2. Is the Address Book setting correct? Go to step 3. Set the correct Address Book information. 3 1. Check the printer specification. 2. Does the printer specification meet the server specification? Go to step 4. Change the server. 4 1. Check the Scanner Controller Board for correct installation. Reseat the Scanner Controller Board. 2. Does the error still occur when connecting to the server? Replace the Scanner Controller Board. Complete. 5 1. Check the network connection. Reseat the network connector. 2. Does the error still occur? Go to step 6. If an MPC Card is not installed, go to step 7. Complete. 6 1. Check the MPC Card for correct installation. Reseat the MPC Card. 2. Does the error still occur when connecting to the server? Go to step 7. Complete. 7 1. Check the network setting: System > Admin Menu > Network Settings. 2. Is the printer network setting correct? Go to step 8. Change the Network Setting information. 8 1. Check the Image Processor Board for correct installation. Reseat the Image Processor Board. 2. Does the error still occur when connecting to the server? Replace the Image Processor Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie