Code: 042-313
Description: Fan Motor Error (Duplex Fan) Error for the Duplex Fan Motor has occurred. The following troubleshooting procedure applies to this error.
Causes: • Front Cover Harness, PL1.2.13 • MCU Board, PL9.2.13 • Right Side Harness, PL10.1.12 • Duplex Unit, PL12.1.1 • Duplex Harness, PL12.1.18
Remedy: 1 1. Perform the Duplex Fan test: Service Mode > Printer Diag > Engine Diag > Motor Test > Duplex Fan. 2. Does the Motor operate properly? Replace the MCU Board. Go to step 2. 2 1. Check the Duplex Unit installation. Reseat the Duplex Unit. 2. Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/J27, P/J272, P/J2720, and P/J428 between the Duplex Board and the MCU Board. 2. Are the connectors securely connected? Go to step 4. Go to step 8. 4 Check the Duplex Unit Harness for continuity. 1. Disconnect P/J428 from the Duplex Board. 2. Disconnect P/J2720 from the Front Cover Harness. 3. Check continuity between P/J2720 <=> P/J428. Go to step 5. Replace the Duplex Unit Harness. 5 Check the Front Cover Harness for continuity. 1. Disconnect P/J2720 and P/J272. 2. Check continuity between P/J2720 <=> P/J272. Go to step 8. Replace the Front Cover Harness. 6 Check the Right Side Harness for continuity. 1. Disconnect P/J272 from the Front Cover Harness. 2. Disconnect P/J27 from the MCU Board. 3. Check continuity between P/J27 and P/J272. Go to step 7. Replace the Right Side Harness. 7 1. Replace the Duplex Unit. 2. Does the error still occur? Replace the MCU Board. Complete. 8 1. Reconnect the wiring harness connectors. 2. Does the error still occur when the printer is turned On? Go to step 4. Complete.