Description: Laser Error An error was detected in the Laser Unit. The following troubleshooting procedure applies to this error.
Causes: • Laser Unit, PL5.1.12 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Laser Unit for correct installation. 2. Is the Laser Unit correctly installed? Go to step 3. Reinstall the Laser Unit. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the wiring harness connector P/J12 on the MCU Board. 2. Is the connector securely connected? Go to step 5 Reconnect the connector. Go to step 4. 4 Does the error still occur when the printer is turned On? Go to step 5. Complete. 5 1. Check the MCU Board for correct installation. 2. Is the MCU Board correctly installed? Go to step 7. Reseat the MCU Board. Go to step 6. 6 Does the error still occur when the printer is turned On? Go to step 7. Complete. 7 1. Replace the Laser Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.