Code: 072-215
Description: 550 Feeder Error (Optional 550-Sheet Feeder) The Optional 550-Sheet Feeder has failed. The following troubleshooting procedure applies to this error.
Causes: • MCU Board, PL9.2.13 • Right Side Harness, PL10.1.12 • Optional 550-Sheet Feeder, PL13.1.1 • Feeder Unit Harness, PL13.3.3 • Tray 3 Feeder Board, PL13.3.6
Remedy: 1 1. Check the Optional 550-Sheet Feeder for correct installation. 2. Is the Optional 550-Sheet Feeder correctly installed? Go to step 3. Reseat the Optional 550- Sheet Feeder. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/J27, P/J273, and P/ J419 between the MCU Board and the Tray 3 Feeder Board. 2. Are the connectors securely connected? Go to step 5. Reconnect the connectors. Go to step 4. 4 Does the error still occur when the printer is turned On? Go to step 5. Complete. 5 Check the Feeder Unit Harness for continuity. 1. Disconnect P/J419 from the Tray 3 Feeder Board. 2. Disconnect P/J273 from the Right Side Harness. 3. Check continuity between P/J419 <=> P/J273. Go to step 6. Replace the Feeder Unit Harness. 6 Check the Right Side Harness for continuity. 1. Disconnect P/J27 from the MCU Board. 2. Disconnect P/J273 from the Feeder Unit Harness. 3. Check continuity between P/J27 <=> P/J273. To go step 7. Replace the Right Side Harness. 7 1. Replace the Optional 550-Sheet Feeder. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.