Description: Transfer Unit CRUM Error The Transfer Unit CRUM ID error is detected. The following troubleshooting procedure applies to this error.
Causes: • Transfer Unit, PL4.1.1 • MCU Board, PL9.2.13
Remedy: 1 1. Check the Transfer Unit for correct installation. 2. Is the Transfer Unit correctly installed? Go to step 3. Reseat the Transfer Unit. Go to step 2. 2 Does the error still occur when the printer is turned On? Go to step 3. Complete. 3 1. Replace the Transfer Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.