Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 094-910 — Xerox Phaser 6180 MFP

Code: 094-910

Description: Insert Transfer Unit The printer does not detect the Transfer Unit. The following troubleshooting procedure applies to this error.
Causes: • Transfer Unit, PL4.1.1 • MCU Board, PL9.1.20 • Front Cover Harness, PL1.2.11 • Right Side Harness, PL10.1.15
Remedy: 1 Is the Transfer Unit installed correctly? Go to step 2. Reseat the Transfer Unit. 2 Does the error still occur? Go to step 3. Complete. 3 1. Check the wiring harness connectors P/ J27, P/J272, and P/J2721 between the MCU Board and the Transfer Unit. 2. Are the connectors securely connected? Go to step 4. Reconnect the connectors. 4 Check the Right Side Harness for continuity. 1. Disconnect P/J27 from the MCU Board. 2. Disconnect P/J272 from the Front Cover Harness. 3. Check continuity between P/J27 <=> P/ J272. Go to step 5. Replace the Right Side Harness. 5 Check the Front Cover Harness for continuity. 1. Disconnect P/J272 from the Right Side Harness. 2. Disconnect P/J2721 from the Transfer Unit. 3. Check continuity between P/J272 <=> P/ J2721. Go to step 6. Replace the Front Cover Harness. 6 1. Replace the Transfer Unit. 2. Does the error still occur when the printer is turned On? Replace the MCU Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie