Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 116-397, 116-398, 117-313 — Xerox Phaser 6180 MFP

Code: 116-397, 116-398, 117-313

Description: Controller Error Communication error has occurred while performing a copy job. The following troubleshooting procedure applies to these errors. • Chain Link 116-397: Controller Error (Communication Error with AIOC) • Chain Link 116-398: Controller Error (Communication Time Out with AIOC) • Chain Link 117-313: Controller Communication Error (ESS Data Transmission Error)
Causes: • Scanner Controller Board, PL9.1.1 • Image Processor Board, PL9.1.20 • AIO-ESS Harness Assembly, PL10.1.14
Remedy: 1 1. Turn the printer Off, wait for five seconds, and turn the printer back On. 2. Does the error still occur when copying? Go to step 2. Complete. 2 1. Check the wiring harness connector P/J480 on the Image Processor Board. Reseat the connector. 2. Does the error still occur when copying? Go to step 3. Complete. 3 1. Check the wiring harness connector P/J48 on the Scanner Controller Board. Reseat the connector. 2. Does the error still occur when copying? Go to step 4. Complete. 4 Check the AIO-ESS Harness for continuity. 1. Disconnect P/J48 from the Scanner Controller Board. 2. Disconnect P/J480 from the Image Processor Board. 3. Check continuity between P/J48 <=> P/J480. Go to step 5. Replace the AIO-ESS Harness Assembly. 5 1. Replace the Scanner Controller Board. 2. Does the error still occur when copying? Replace the Image Processor Board. Complete.

← Xem tất cả mã lỗi Xerox Phaser 6180 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie