Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 191 — Xerox Phaser 6300

Code: 191

Description: Output Tray Is Full, Unload Paper The Full Stack Sensor indicates the output tray is full.
Causes: • Full Stack Sensor, PL5.4.1 • Full Stack Actuator, PL5.4.2 • FRONT/DUP Harness, PL5.3.28
Remedy: 1 Check the following for evidence of fault or damage: • Full Stack Sensor, PL5.4.1 • Full Stack Sensor Actuator, PL5.4.2 Replace the parts concerned. Go to Step 2. 2 Test the Full Stack Sensor. Run the Service Diagnostics Full Stack Sensor test. Does the sensor function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Full Stack Sensor connection. Is P/J134 connected to the harness? Go to Step 4. Reconnect the sensor. 4 Replace the Full Stack Sensor. Does the error persist? Go to Step 5. Complete 5 Check all pins on the FRONT/DUP Harness PL5.3.28 for continuity. 1. Disconnect P/J13 and P/J134. 2. Check continuity between J13 <=> J134. Replace the Engine Control Board. Replace the FRONT/DUP Harness.

← Xem tất cả mã lỗi Xerox Phaser 6300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie