Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 86 ... 89 — Xerox Phaser 6300

Code: 86 ... 89

Description: [Y] [M] [C] [K] Toner Cartridge Failure A CRUM error has occurred for the indicated Toner Cartridge. Code 86: Cyan Toner Cartridge Failure Code 87: Magenta Toner Cartridge Failure. Code 88: Yellow Toner Cartridge Failure Code 89: Black Toner Cartridge Failure
Causes: • Toner Cartridge, PL7.2.8 • RFID Harness, PL7.2.17 • RFID2 Harness, PL7.2.16 • CRUM Reader, PL7.2.12
Remedy: 1 Check Toner Cartridge installation. Are the Toner Cartridges properly installed? Go to Step 2. Correct the installation. 2 Replace the affected Toner Cartridge. Does the error persist after a genuine Xerox Toner Cartridge is installed? Go to Step 3. Complete 3 Check the CRUM Reader connection. Is P/J341 connected to the harness? Go to Step 4. Connect the CRUM Reader Board 4 Replace the CRUM Reader. Does the error persist? Go to Step 5. Complete 5 Check all pins on the RFID2 Harness PL7.2.16 for continuity. 1. Disconnect P/J341 and P/J3411. 2. Check continuity between J341 <=> J3411. Go to Step 6. Replace the RFID2 Harness. 6 Check all pins on the RFID Harness PL7.2.17 for continuity. 1. Disconnect P/J3411 and P/J34. 2. Check continuity between P3411 <=> J34. Replace the Engine Control Board. Replace the RFID Harness.

← Xem tất cả mã lỗi Xerox Phaser 6300

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie