Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 160, 162, 163 — Xerox Phaser 6350

Code: 160, 162, 163

Description: Insert Tray [3] [4] [5] or Tray [3] [4] [5] Missing The tray’s Paper Size Switch indicates that the reported tray is not installed. Tray 3 can refer to either optional feeder. Code 160: Insert Tray 3 Code 162: Insert Tray 4 Code 163: Insert Tray 5
Causes: For 550-Sheet Feeder: • Paper Size Switch, PL11.2.6 • Paper Tray, PL11.4.1 • SIZE Harness, PL11.2.8 • OPFREC Harness, PL11.1.6 For 1100-Sheet Feeder: • Paper Size Switch, PL12.2.6 • Paper Tray, PL12.6.1 • SIZE2 Harness, PL12.3.5 • OPFREC2 Harness, PL12.3.1
Remedy: 1 Check the affected tray for damage: • Paper Size Switch, PL11.2.6, PL12.2.6 • Paper Size Switch Actuators, PL11.4.10, PL12.6.10 • Paper Tray, PL11.4.1, PL12.6.1 Is there any damage? Replace the damaged parts. Go to Step 2. 2 Test the affected Paper Size Switch. Run the Service Diagnostics Paper Size Switch test.Use the table on. Do the switches function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Paper Size Switch signals. Verify +3.3 V on pins: P/J821-1 <=> P/J80-4 P/J821-3 <=> P/J80-2 P/J821-4 <=> P/J80-1 Is there +3.3 V when actuated? Go to Step 4 Replace the affected Paper Size Switch. 4 Check all pins on the SIZE Harness for continuity. 1. Disconnect P/J80 and P/J821. 2. Check continuity between J80 <=> J821 Go to Step 5. Replace the SIZE Harness. 5 Check all pins on the OPFREC Harness for continuity. 1. Disconnect P/J171 or P/J172 and P/J83. 2. Check continuity between J171/2 <=> P83 Replace the Engine Control Board. Replace the affected OPFREC Harness.

← Xem tất cả mã lỗi Xerox Phaser 6350

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie