Code: 178, 179, 180
Description: Wrong Paper Size; Load Tray [3][4][5] with [size][type] Tray [3] [4] [5] paper size mismatch error. Code 178: Wrong Paper Size; Load Tray 3 with [size] [type] Code 179: Wrong Paper Size; Load Tray 4 with [size] [type] Code 180: Wrong Paper Size; Load Tray 5 with [size] [type]
Causes: For 550-Sheet Feeder: • Paper Size Switch, PL11.2.6 • Paper Tray, PL11.4.1 • SIZE Harness, PL11.2.8 For 1100-Sheet Feeder: • Paper Size Switch, PL12.2.6 • Paper Tray, PL12.6.1 • SIZE2 Harness, PL12.3.5
Remedy: 1 Check the affected tray for damaged parts: • Paper Size Switch, PL11.2.6, PL12.2.6 • Paper Tray, PL11.4.1, PL12.6.1 Are any parts damaged? Replace damaged parts. Go to Step 2. 2 Test the affected Paper Size Switch. Run the Service Diagnostics Paper Size Switch test. Use the table on. Do the switches function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Paper Size Switch signals. Verify +3.3 V on pins: P/J821-1 <=> P/J80-4 P/J821-3 <=> P/J80-2 P/J821-4 <=> P/J80-1 Is there +3.3 V when actuated? Go to Step 4. Replace the affected Paper Size Switch. 4 Check all pins on the SIZE Harness for continuity. 1. Disconnect P/J80 and P/J821. 2. Check continuity between J80 <=> J821. Go to Step 5. Replace the Size Harness. 5 Check all pins on the OPFREC Harness continuity. 1. Disconnect P/J171 or P/J172 and P/J83. 2. Check for continuity between J171/2 <=> P83. Replace the Engine Control Board. Replace the affected OPFREC Harness.